|
Before and after views
of a pulp and paper facility's discharge system that was repaired with
a fast cure mortar and protected from future damage with one of Corolon's
Novolac Expoxies.
Recommended Usage:
- Primary and Secondary
Containment Structures
- Steel & Concrete
Tank Linings
- Ducts, (FGD), Stacks,
Tub Sheets
- Pumps and valves
- Heat Exchangers
& Water Boxes
- Flue Gas Scrubbers
- Stainless Mist
Eliminators
Corolac 5400
is a sprayable, 100% Solids Industrial Maintenance Coating for metal and
concrete substrates. Corolac 5400 is a very high cross-link density, ceramic-filled
novolac coating that is designed to provide maximum chemical resistance
at higher temperatures as well as excellent wear and abrasion resistance.
Corolac 5600 is a two component, 100% solids epoxy novolac possessing
excellent overall chemical resistance and outstanding acid resistance.
Corolac 5600 is generally used for primary or secondary containment of
aggressive chemicals. It is suitable for use in a broadcast system to
provide a non-slip system in pedestrian areas where aggressive chemicals
are present.
Corolon 6010 provides protective coating for concrete/steel structures.
It provides good chemical as well as abrasion resistance. Incorporation
of suitable aggregates can provide a variety of non-slip surfaces.
Corolac XMH 8518 is a corrosion resistant compound and protective
lining designed to offer resistance to cavitation, impingement, and bimetallic
corrosion. It is a two-part, 100% solids epoxy that has been toughened
with an elastomer. The elastomeric modifier offers a high degree of elongation,
flex, expansion and contraction capabilities. Wearcoat XMH 8518 also uses
ceramic fillers for high resistance to particle erosion and for chemical
inertness.
COROLON SYSTEM 150 - Two component modified expoxy - polyamide
system designed to protect metal and plastic surface from enviromental
attack of petroleum products... Click Here
|
